How to use Pool Puck

Instructions

The AquaFinesse™ Pool Puck is only intended for use in swimming pools.

Starting with Aquafinesse™ Pool Puck

1. Filters should be maintained regularly following manufactures recommendations. 
2. Ensure that the pool floor is regularly vacuum cleaned and the filters backwashed. (Clean filters are an essential element for water purity)
3. Always maintain the  correct level of water in the pool, topping up if necessary with fresh water following a backwash.
4. Using the gloves provided, place one of the chlorine tablets supplied in the skimmer basket. 
5. Add an AquaFinesse Pool Puck tablet using the floating dispenser supplied. Each tablet is sufficient to treat 20,000 litres of water. For example if your pool holds 40,00 litres of water you would need 2 AquaFinesse Pool Puck tablets for one weeks treatment. Please use the calculation guide below to establish the water capacity of your swimming pool. 
6. During the first week of treatment a double dose of AquaFinesse Pool Puck should be used. Half of which should be added to the skimmer basket and the other half in the floating dispenser ensuring dispensers shutters are fully open. 
7. Use the normal recommended dose in the weeks that follow placing the AquaFinesse Pool Puck in the floating dispenser and allow it to float freely on the waters surface.
8. Regularly check to see if there is still a chlorine tablet in the skimmers basket. If the chlorine tablet has dissolved, replace immediately with a new one. AquaFinesse Pool Puck do not contain any anti-algae agents, but unormal circumstances the chlorine table is sufficient to keep the pool algae free.
9. Calculation guide: If a pool is 7 metres long, 3.5 metres wide and on average 1.5 metres deep, the capacity is then: 7 x 3.5 x 1.5 = 36.75 m/sq = 36,750 litres. Rounded up, 40,000 litres.

Example of use in a 40,000 litre pool